Host Adapter Installation Guide

8 Sun StorEdge PCI/PCI-X Dual Ultra320 SCSI Host Adapter Installation Guide • January 2007
Connecting the Host Adapter
Before you connect the host adapter to the storage device(s), do the following:
■ Refer to the release notes for the lists of supported cables and storage devices.
Downloading the release notes is described in “To Access the Release Notes” on
page viii.
■ Refer to Appendix A, “Ultra320 SCSI Configuration” on page 13 for general
information on configuration for Ultra320 SCSI devices.
■ Refer to your system documentation and the storage device installation manual
for specific cabling instructions.
▼ To Connect SCSI Cable(s) From the Host
Adapter to the Storage Device(s)
1. Connect the host adapter to the storage device(s) using the appropriate cable(s).
Refer to Table 1-1 for SCSI interface connection information.
TABLE 1-1 Sun StorEdge PCI/PCI-X Dual Ultra320 SCSI Host Adapter Interfaces
SCSI Interface External Connector Internal Connector
Channel A J2 J6
Channel B J3 J4