Tablet Accessory User Manual

Conductor Script Commands
302 iPlanet Integration Server • Process System Guide • August 2001
The SetQueuedActivityPriority command is available only when an engine is
current, so you must first use the
FindEngine Script command to set the current
engine.
The
SetQueuedActivityPriority command lets you change the ordering of
activities in a queue by changing the value of the queue prioritizing attribute for a
specified activity in the queue. Doing so causes the engine to place the specified
activity instance in a different position in the queue.
SetState
The SetState command sets the state of the specified engine unit.
SetState state
The SetState command is only available if the current component is an engine
unit. Use the
FindEngine Script command to set the current engine and the
FindUnit Script command to make the desired engine unit current.
The
SetState command is normally used to take the primary engine unit offline
for administrative functions and then to restore it to ONLINE state afterwards.
Placing the primary engine unit in STANDBY state will not cause the partner
engine unit to come ONLINE.
SetTimer
The SetTimer command sets the specified timer to the specified state and resumes
operation (or resets the timer).
SetTimer process_id timer_name state [reset]
Argument Description
state The state to which the engine unit will be set: ONLINE or STANDBY.
Argument Description
process_id The process instance of the specified timer.
timer_name The name of the specified timer.
state The specified new state: ON, OFF, or no change.