Tablet Accessory User Manual

Conductor Script Commands
Appendix A Conductor Script Commands 285
FindNode
The FindNode command sets the specified node as the current node.
FindNode node_name
The FindNode command is available only for the current engine.
The
FindNode command is normally used to start engine components (using the
StartGovernor, StartDBService, and StartUnit Script commands).
FindParentEngine
The FindParentEngine command makes the component’s parent engine current.
FindParentEngine
The FindParentEngine command is available only when an engine component is
current.
The
FindParentEngine command is used to navigate to the current engine when
one of its components is current and you want to make another of its components
current. (The
Find and Start component Script commands are only available
when an engine is current.)
FindPrimary
The FindPrimary command sets the primary engine unit for the current engine as
the current component.
FindPrimary
The FindPrimary command is available only when an engine is current, so you
must first use the
FindEngine Script command to set the current engine. The
primary engine unit must also be running.
Argument Description
node_name The specified node. Must be in same environment as the engine.