Tablet Accessory User Manual

Managing Process Execution with Conductor Script
254 iPlanet Integration Server • Process System Guide • August 2001
Managing Timers
➤ To check the status of a timer
1. Use the FindEngine command to make a particular engine current.
2. Use the ListTimers command to display a list of timers in the current engine.
3. Use the CreateFilter command to filter the list of timers, if desired.
4. Use the ListTimers command to display a list of filtered timers.
5. Use the ShowTimer command to display information about a particular timer.
The output shows information about the timer, its state and its expiration time.
➤ To change the state of a timer or change its expiration time
1. Display a list of timers as described in Step 1 through Step 4 above.
2. Use the ShowTimer command to display information about a particular timer.
3. Use the SetTimer, SetTimerDeadline, or SetTimerElapsed command to turn
a timer on or off, or to change the expiration date or time, depending on
whether the timer is a deadline timer or an elapsed timer.
Managing Process Attributes
➤
To check the value or lock state of a process attribute
1. Use the FindEngine command to make a particular engine current.
2. Use the ListProcesses command to display a list of process instances in the
current engine.
3. Use the CreateFilter command to filter the list of process instances, if
desired.
4. Use the ListProcesses command to display a list of filtered process instances.
5. Use the ShowProcess command to display information about a particular
process instance.
The output shows information about the process attributes of the process
instance.