Interface Adapter User's Guide

9
CHAPTER
3
SunHSI PCI Software Installation
This chapter describes how to install the SunHSI PCI software and includes the
following sections:
■ “Installation Overview” on page 9
■ “Before Installing the Software” on page 11
■ “Installing the Software” on page 12
■ “Configuring the Software” on page 14
Installation Overview
Software for unbundled products is distributed in the form of software packages.
The SunHSI PCI software package can be downloaded from the Sun Download
Center at:
http://www.sun.com/download
You can use the pkgadd command to install software packages, to spool software
packages for installation at a later date, or to remove software packages from your
system. For more information see the Solaris System Administration Guide. When you
have completed the software installation and run the postinstallation script, you will
have created the software directories and files illustrated in
FIGURE 3-1 and
FIGURE 3-2.
Note – If you are upgrading to the SunHSI/U adapter from the SunHSI/P adapter
or if you are running a SunHSI/P adapter along with the SunHSI/U adapter, you
must upgrade the SunHSI software to the latest version.