Network Card User Manual

Chapter 3 Installing the Front-Access Adapter 31
FIGURE 3-2 Opening the Ejection Levers (Two Types of Levers)
7. Lift up the adapter, and keeping it perfectly vertical, carefully slide the adapter
into the selected slot.
Be sure to align the top and bottom of the adapter into the slot’s card guides
(
FIGURE 3-3). Also, make sure the ejection levers remain open while you slide the
adapter into the slot.
FIGURE 3-3 Aligning the Front Adapter in CompactPCI Slot Card Guide
Locking mechanism
Locking mechanism