Network Card User Manual

26 Sun Quad FastEthernet 6U CompactPCI Adapter Installation and User’s Guide • June 2000
Connecting the Cables to the Rear
Transition Card
After installing the adapter in the system, you can attach the Ethernet cables to the
Ethernet ports on the rear transition card.
▼ To Connect the Cables to the Rear Ethernet Ports
1. Locate the adapter’s rear transition card that you installed in the system.
2. Connect one end of an Ethernet cable to an Ethernet port on the rear transition
card (see
FIGURE 2-12).
FIGURE 2-12 Connecting Cables to the Rear Transition Card
3. Connect the other end of the Ethernet cable to an active Ethernet network.
Repeat Steps 2 and 3 for each Ethernet cable you need to connect.
Ethernet cable