Network Card User Manual

8 Sun Quad FastEthernet 6U CompactPCI Adapter Installation and User’s Guide • June 2000
Preparing for the Installation
Before installing the adapter, prepare for the installation by assembling the
appropriate tools, unpacking the ship kit, selecting a CompactPCI slot, and
determining a mode of installation.
Tools and Equipment Needed
You will need:
■ A No. 0 Phillips screwdriver
■ An antistatic wrist strap (included in the ship kit)
■ Ethernet cables to connect the adapter to an Ethernet network
■ Electrostatic discharge (ESD) mat (optional)
Contents of the Ship Kit
The ship kit contains the following items:
■ Front card
■ Rear transition card
■ Antistatic wrist strap
■ This manual
■ A product note document
Caution – Electrostatic discharge can damage the integrated circuits on the cards.
Leave the cards in their antistatic envelopes until you are ready to install them in the
system.