Ethernet PCI-X Adapter Installation and User's Guide

46 Sun 10-Gigabit Ethernet PCI-X Adapter Installation and User’s Guide • December 2005
http://www.sun.com/products-n-solutions/hardware/docs/Software
/system_administration/tools/testing_valid/sunvts/index.html
Select the document for the Solaris release on your system.
Updating SunVTS to Recognize the
Adapter
Current versions of SunVTS do not recognize the Sun 10-Gigabit Ethernet PCI-X
adapter. You will need to update the SunVTS configuration.
▼ To Update SunVTS to Recognize the Adapter
1. Plug in a loopback cable.
2. Ensure that the SunVTS software and the ixge driver are installed on your
system.
3. Add the following lines to the /opt/SUNWvts/lib/conf/netlbtest.conf and
/opt/SUNWvts/lib/conf/nettest.conf files:
TABLE B-1 SunVTS Documentation
Title Description
SunVTS User’s Guide Describes the SunVTS diagnostic environment
SunVTS Test Reference Manual Describes each SunVTS test (including the nettest)
and describes the various test options and
command-line arguments
SunVTS Quick Reference Provides an overview of the user interface
ixge ixge 10GbE