Ethernet PCI-X Adapter Installation and User's Guide

12 Sun 10-Gigabit Ethernet PCI-X Adapter Installation and User’s Guide • December 2005

■ If your system is running Sun Enterprise Volume Manager™, it should

automatically mount the CD-ROM to the /cdrom/cdrom0 directory.

■ If your system is not running Sun Enterprise Volume Manager, mount the CD-

ROM as follows:

Note – If you are installing the software from the download site, follow the online

download instructions.

3. Change to the directory were the installation script resides:

where:

■ media-path = /cdrom/cdrom0, if you are installing from the CD-ROM.

■ unzipped 10-Gigabit-path/Sun_10-Gigabit_Ethernet_Driver, if you

downloaded the driver from the Sun download center.

4. Execute the installation script:

Note – After the installation script runs, you see a summary of the software package

or patch that was installed. You can also find a log of the installation in /var/tmp.

The log file information is displayed when the installation completes unless the

software meets or exceeds the required package or patch level.

You’ll see the following output

# mount -F hsfs -o ro /dev/dsk/c0t6d0s2 /cdrom/cdrom0

# cd /media-path/

# ./install

CODE EXAMPLE 2-1 Typical Install Script Output

# ./install

10-Gigabit Ethernet Adapter Driver for sparc Installation.

Use is subject to license terms.