Accessories

40 Wireless Toolkit Basic Customization Guide • December 2003
softbutton.<number> = <x>,<y>,<width>,<height>,<font>,<align>
where the parameters are defined as follows:
■ The coordinates of the soft button label:
■ x: The x-coordinate of the left edge of the label area, in pixels relative to the
left edge of the screen area
■ y: The y-coordinate of the top edge of the label area, in pixels relative to the
top edge of the screen area
■ width: The width of the label, in pixels
■ height: The height of the label, in pixels
■ font: The font of the soft button label
■ align: The alignment of the text of the soft button label within its area: "left",
"right" or "center"
For example:
softbutton.0 = 0,110,36,18, softButton, left
softbutton.1 = 60,110,36,18, softButton, right
Color
Three properties are provided to control the color in the Emulator:
■ The isColor property determines whether the display is grayscale (false) or
color (true).
■ The colorCount property controls the number of colors available (when
isColor is true) or the number of shades of gray available (when isColor is
false).
■ The gamma property determines the level of gamma correction to be used when
displaying the device's screen. The default value of this property is 1.0.
For example:
isColor = false
colorCount = 256
gamma = 2.0
Sound Alerts
Sounds that are played when alert with sound is displayed can be specified.
Default sound can be specified by setting the option:
alert.default.sound = <sound_file>
This sound file will be used for all alerts where an alert-specific sound is not
defined. Sound for each alert can be defined by: