FastEthernet PCI Adapter Installation & User's Guide

Name = SUNW,qfe
Parent = /pci@1f,2000/pci@2
Unit-address = 3,1
1. Set the ipg1 and ipg2 parameters for the above four devices in the
/kernel/drv/qfe.conf file.
name = ‘‘SUNW,qfe’’ parent = ‘‘/pci@1f,2000/pci@2’’ unit-address = ‘‘0,1’’ ipg1=20 ipg2=10;
name = ‘‘SUNW,qfe’’ parent = ‘‘/pci@1f,2000/pci@2’’ unit-address = ‘‘1,1’’ ipg1=20 ipg2=10;
name = ‘‘SUNW,qfe’’ parent = ‘‘/pci@1f,2000/pci@2’’ unit-address = ‘‘2,1’’ ipg1=20 ipg2=10;
name = ‘‘SUNW,qfe’’ parent = ‘‘/pci@1f,2000/pci@2’’ unit-address = ‘‘3,1’’ ipg1=20 ipg2=10;
2. Save the qfe.conf file.
3. Save and close all files and programs, and exit the windowing system.
4. Halt and reboot the system by typing the init 6 command at the
superuser prompt.
40
Sun Quad FastEthernet PCI Adapter Installation and User’s Guide ♦ Revision A, August 1997