Network Card User Manual

Chapter 2 Installing and Setting Up the Driver 11
7. Use the ethtool command to check the parameter configurations that apply to
the nxge driver.
▼ To Remove the Driver From a Linux Platform
● To remove the driver packages from a Linux Platform use the rpm -e command:
(For 10G)
# ethtool -i eth4
driver: nxge
version: 2.0.1
firmware-version: 2XGF PXE1.47 FCode 3.9 07/04/24
bus-info: 0000:84:00.0
(Equivalent for 1G)
# ethtool -i eth4
driver: nxge
version: 2.0.1
firmware-version: QGC PXE1.47 FCode 3.9 07/04/24
bus-info: 0000:02:00.2
# rpm -e nxge-1.0-1