Replacement Part List

7
3. Push the power cable into the Cable Guide located on
the Plastic Cross Plate (See Fig. 3).
4. Position the assembled upper frame onto the motor
housing aligning the holes (See Fig. 4).
5. Insert the Wing-nuts and bolts (J) and tighten (See Fig. 5).
6. Secure the power cable to the unit body by using the
Cable Clips (G, L). Use one clip above the Plastic Cross
Plate and the second below the Plastic Cross Plate
(See Fig. 6).
Figure 4
Front View
Figure 6
Front View
Figure 5
Front View
Figure 3
Front View
J
G
L
Cable Clips