Replacement Part List
4
• Do not bury the guide bar nose or try to cut by boring the
guide bar nose into the wood.
• Watch for shifting of wood or other forces that may pinch
the chain.
• Use extreme caution when re-entering a previous cut.
• Use the low-kickback chain and guide bar supplied with
this 2-in-1 pole + chain saw. Only use genuine Snow Joe
®
+ Sun Joe
®
replacement parts designed specically for
use with this 2-in-1 pole + chain saw.
• Never use a dull or loose chain. Keep the chain sharp and
properly tensioned.
• Follow the manufacturer’s sharpening and maintenance
instructions for the saw chain. Decreasing the depth
gauge height can lead to increased kickback.
• Always observe the safety regulations and follow the
correct sawing techniques.
• Ensure safe carrying of the unit. Whenever the machine is
to be handled or transported, you must:
– Switch o the motor and wait for the chain to come to
a complete stop;
– Mount the guide bar cover;
– Hold the machine using the hand grips and
position the bar in the opposite direction to that used
during operation.
When using a vehicle to transport the machine, fasten the
tool rmly and position it so that it is not a danger to any
passengers.
• Before cutting, pruning, or delimbing for the rst time,
make sure:
– You have been specically trained to use this type
of equipment;
– Yo u have carefully read the safety regulations and
user instructions contained in this manual;
– You practice rst on logs on the ground or attached
to trestles/saw horses, in order to get familiar with the
machine and the proper cutting techniques.