Use and Care Manual

7
Unpacking
Carton Contents
• Electric wet/dry vacuum
• Suction hose
• Extension tubes (2)
• Wet + dry oor brush
• Carpet + oor brush
• Dust brush
• All-purpose nozzle
• Crevice nozzle
• Manuals + Registration card
1. Carefully remove the electric wet/dry vacuum and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the wet/dry vacuum.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suocation
risk!
Assembly
m
WARNING! To avoid serious personal injury, read and
understand all safety instructions provided.
mWARNING! Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
mWARNING! Before performing any maintenance, make
sure the tool is unplugged from the power supply. Failure to
heed this warning could result in serious personal injury.
mWARNING! To prevent personal injury, make sure the
switch is in the OFF position before attaching or removing the
suction hose.
1. Simultaneously depress the dual locking buttons on either
side of the hose connector. Insert the hose connector into
the air inlet hole and push rmly to secure (Fig. 1).
2. Two extension tubes are included with the unit. If needed,
take the slightly narrowed end of the rst extension tube
and using a twisting motion, insert into the attachment
handle. Press rmly to secure. In the same manner,
assemble the second tube (Fig. 2).
3. Select desired accessory, connect it with the end of the
extension tube, press rmly to lock securely. Your wet/
dry vacuum is ready for use. If no extension is needed,
connect the desired accessory directly to the attachment
handle (Fig. 3).
Fig. 1
Suction hose
Air
inlet
Hose
connector
Dual locking
buttons
Fig. 2
Attachment
handle
Extension tube
Extension tubes
Fig. 3
Accessories
Attachment
handle
Extension
tube