User Manual

4. Slide the trigger gun holder in position (Fig. 4).

5. To assemble the spray wand protector, rst snap the tab

into the slot located at the bottom left side of the unit, and

then secure it in place with one 4.8 x 16 screw (Fig. 5).

6. Fit the spray wand into the trigger gun and rotate it until

the two parts are completely locked (Fig. 6).

7. Connect the high-pressure hose to the trigger gun (Fig. 7).

8. Connect the other end of high-pressure hose to the water

outlet on the washer (Fig. 8).

Fig. 3

Nozzle

storage board

Fix with 4.8

x 16 screws

Fig. 4

Trigger gun holder

Fig. 5

Tab

Slot

4.8 x 16 screw

Fig. 6

Spray wand

Trigger gun

High-pressure hose

Trigger gun

Fig. 7