Replacement Part List

4. Run the PVC detergent tube through one of the holes

located at the top of the handle and connect the tube to

the detergent connection (Fig. 4).

5. To assemble the hose holder, slide the holder into position

and secure it to the unit with the remaining two (2) small

screws (Fig. 5).

6. Fit the spray wand into the gun and rotate it until the two

parts are completely locked (Fig. 6).

7. Connect the silver end of the high-pressure hose to the

trigger gun and twist the nut as indicated to secure the

connection (Fig.7).

8. Connect the other end of the high-pressure hose to the

water outlet on the washer and twist the black rotatable

end-piece as indicated to secure the connection (Fig. 8).

mWARNING! Keep hose away from sharp objects.

Bursting hoses may cause injury. Examine hoses regularly and

replace if damaged. Do not attempt to mend a damaged hose.

9. Connect the garden hose adaptor (female coupler) to

the water inlet of the pressure washer, then thread your

garden hose (male end) into the garden hose adaptor

(Fig. 9). The garden hose must have an internal diameter

of at least 13 mm (1/2 in.) and must be reinforced. The

water supply must be at least equal to the washer delivery

capacity.

NOTE: The machine is not suitable for connection to the

potable water main.

Fig. 4

Detergent

connection

Detergent tank

Detergent tube

Fig. 5

2 small screws

Hose holder

Fig. 6

Trigger gun

Fig. 7

High pressure hose

Fig. 8

(FRONT)

High-pressure water outlet

High-pressure hose