User Manual

8
3. Slide the trigger gun holder into position (Fig. 3).
4. Slide the hose/cord holder into position (Fig. 4).
5. Fit the two pieces of the spray wand assembly together
and rotate it until the two parts are completely locked
(Fig. 5).
6. Fit the spray wand assembly into the gun and turn the
rotatable end-piece of the wand until the two parts are
completely locked (Fig. 6).
7. Connect the quick-connect end of the high-pressure hose
to the trigger gun (Fig. 7). You will hear a click when it
snaps into place. To release the high-pressure hose from
the trigger gun, push the release button on the trigger gun.
8. Connect the other end of the high-pressure hose to
the water outlet on the pressure washer (Fig. 8). First,
push the high-pressure hose end completely onto the
high-pressure water outlet, then screw it on clockwise.
Fig. 3
Trigger gun
holder
Fig. 4
Hose/
cord holder
Fig. 5
RELEASE
Spray wand assembly
Trigger gun
Fig. 6
RELEASE
Push to release
Trigger gun
Fig. 7
High-pressure hose
Fig. 8
(BACK)(BACK)
High-pressure
water outlet
High-pressure
hose