Replacement Part List
13
Lubricate the Blades
For easier operation and longer blade life, lubricate the pole
hedge trimmer blade before and after each use.
1. Stop the motor and disconnect the unit from the power
supply.
2. Lay the pole hedge trimmer on a at surface. Apply
lightweight machine oil along the edge of the top blade
(Fig. 15).
If you will be using the pole hedge trimmer for an extended
period, it is advisable to stop work intermittently in order to
re-oil the blade.
NOTE: Do not oil while the pole hedge trimmer is running.
1. Stop the motor and disconnect from the power supply.
2. Lubricate the pole hedge trimmer as described above.
3. Reconnect to the power source and resume use.
Cleaning the Pole Hedge Trimmer
1. Stop the motor and disconnect from power supply.
2. Clean dirt and debris from the body of the pole hedge
trimmer, using a damp cloth with a mild detergent.
NOTE: Do not use any strong detergents on the plastic
housing or the handle, as they can be damaged by certain
aromatic oils such as pine and lemon, and by solvents
such as kerosene.
Recycling + Disposal
The product comes in a package that protects it against
damage during shipping. Keep the package until you are
sure that all parts have been delivered and the product is
functioning properly. Recycle the package afterwards.
WEEE symbol. Waste electrical product should not be
disposed of with household waste. Please recycle
where facilities exist. Check with you local authority or
local store for recycling advice.
Storage
1. Stop the motor and disconnect from the power supply.
2. Clean the pole hedge trimmer thoroughly before storing.
3. Always place the blade cover on the blade before storing
or transporting the pole hedge trimmer. Use caution to
avoid the sharp teeth of the blade.
4. Store the pole hedge trimmer indoors, in a dry place that
is inaccessible to children. Keep away from corrosive
agents such as garden chemicals and de-icing salts.
5. Always store the pole hedge trimmer in a place that is
inaccessible to children. The ideal storage temperature is
between 50ºF and 86ºF (10ºC and 30ºC).
6. We recommend using the original package for storage or
covering the product with a suitable cloth or enclosure to
protect it against dust.
Service + Support
If your Sun Joe
®
electric pole hedge trimmer requires service or
maintenance, please call the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563).
Model + Serial Numbers
When contacting the company or reordering parts, you will
need to provide the model and serial numbers of your product.
These are found on the decal axed to the housing or handle
of your electric pole hedge trimmer. Copy these numbers into
the space provided below.
Fig. 15
Record the following numbers from the housing or handle of your
new product:
Model #:
Serial #:
S J H 9 0 1 E