Use and Care Manual
12
1. To use the pole hedge trimmer for trimming tall, hard-to-
read hedges or shrubs, hold the trimmer at the position
shown below (Fig. 12). Pivot the power head to several
dierent positions to shape or sculpt shrubs or hedges.
2. To use pole hedge trimmer for trimming the bottoms and
sides of hedges and shrubs, hold the pole trimmer at the
position shown below (Fig. 13).
3. To use pole hedge trimmer for trimming low-lying foliage
or ground cover, hold the pole hedge trimmer at the
position as shown below (Fig. 14).
mCAUTION! Do not use the pole hedge trimmer for
cutting stems greater than 0.70" (1.8 cm) (or approximately
3/4 in. thick).
Use the pole hedge trimmer only for cutting normal shrubbery
found around houses and buildings.
Do not force the pole hedge trimmer through dense growth.
A slight back and forth sawing action may ease the cutting of
larger, more dense growth. If the pole hedge trimmer begins to
slow down, reduce the rate of speed at which you are trying to
cut. If the pole hedge trimmer becomes jammed, immediately
turn the trimmer o. Disconnect the plug from the power
source and clear the jammed debris from the cutter blades.
Care + Maintenance
mWARNING! Before inspecting, cleaning, or servicing the
machine, disconnect the plug from power source and wait for
all moving parts to stop. Failure to follow these instructions can
result in serious personal injury or property damage.
mWARNING! When servicing, use only identical
replacement parts. Use of any other parts may create a hazard
or cause product damage.
• Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to damage from various types of
commercial solvents and may be damaged by their use.
Use clean cloths to remove dirt, dust, oil, grease, etc.
mWARNING! Do not at any time let brake uids, gasoline,
petroleum-based products, penetrating oils, etc., come in
contact with plastic parts. Chemicals can damage, weaken, or
destroy plastic which may result in serious personal injury.
mWARNING! Blades are sharp. When handling the blade
assembly, wear non-slip, heavy-duty protective gloves. Do not
place your hand or ngers between blades or in any position
where they could get pinched or cut. NEVER touch the blades
or service the unit with the power supply connected.
• Store the pole hedge trimmer in the blade cover provided.
Store it in a dry location out of the reach of children.
• When servicing, use only identical replacement parts. Use
of any other parts can create a hazard or cause product
damage. Please contact an authorized Snow Joe
®
+
Sun Joe
®
dealer or call the Snow Joe
®
+ Sun Joe
®
customer
service center at 1-866-SNOWJOE (1-866-766-9563) for all
replacement parts and accessories for your product.
Fig. 12
Fig. 13
Fig. 14