Replacement Part List

12. Repeat steps 8 – 11 to assemble the other side panel.

13. Lay the cart box in the upright position. Remove the front

panel by sliding it up and remove the four large washers

used as shims (Fig. 12).

14. Assemble the supporting tube using four M6 x 50 screws

through the side panels and the supporting tube. Secure

with at washers and handle knobs (Fig. 13).

15. Place the handle tube over the side panels and line up the

four holes. Assemble using four M6 x 50 screws through

the side panels and handle tube. Secure with at washers

and handle knobs (Fig. 14).

16. Lay the cart upside down. Slide the axle through the axle

clamps (Fig. 15).

Fig. 11

Side panel

Front angle

clamp

M6 x 25

screw

Flat washer

Hex nut

Fig. 12

Front

panel

Large

washers

Fig. 13

Supporting

tube

Handle

knobs

Flat washer

M6 x 50

screws

Fig. 14

Handle

tube

Handle

knobs

Flat washer

M6 x 50

screws