Operating Guide

1. Using the hook that is provided and heat-resistant gloves,
carefully remove the spark guard.
2. Using a long-handled re pit tool, shift the coals and logs
to allow for additional air ow.
3. DO NOT add gasoline, kerosene, diesel fuel, lighter uid or
alcohol to relight or enhance an existing re.
4. Use a match to light the kindling or re-starter.
5. Wait until glowing coals have developed before adding
any additional wood. If additional wood is required, place
the wood on top of the coals, taking care not to shift the
ashes.
Extinguishing
1. Let the re burn itself out.
2. DO NOT use water to extinguish the re. Such action is
dangerous and can cause irreversible damage to the re
pit.
Inspecting
This re pit should be inspected on a regular basis to ensure
product safety and longer product life.
m DO NOT attempt to inspect this re pit until the re is
COMPLETELY out and the re pit has COMPLETELY cooled.
1. Check components for any signs of damage or rust.
2. If damage to any component is detected, DO NOT use the
re pit until repairs are properly performed.
Cleaning
This re pit should be cleaned on a regular basis to promote
safer experiences and longer product life.
NOTE: After repeated use, a slight discoloration of the nish
may occur.
DO NOT attempt to clean this re pit until the re is
COMPLETELY out and the re pit has COMPLETELY cooled.
DO NOT use oven cleaner or abrasive cleaners as they will
damage this product.
DO NOT clean any part of this re pit in a self-cleaning oven as
this may damage the nish.
1. Wipe exterior surfaces with a mild dishwashing detergent
or baking soda.
2. For stubborn surfaces, use a citrus-based degreaser and
a nylon scrubbing brush.
3. Rinse and clean with water.
4. Remove built-up creosote from components with a
chimney cleaning product.
Storage
DO NOT move or store this re pit until the re is
COMPLETELY out and the re pit is cool to the touch.
1. Once the re is out, the coals have completely cooled and
the re pit can be safely handled, remove and properly
dispose the ashes.
2. Store the re pit in a clean and dry location to maximize
product life.
3. Store the re pit assembled in a safe location away from
children and pets.
Support
If your Sun Joe
®
Fire Joe SJFP35-STN cast stone re pit
requires service or maintenance, please call 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Model and Serial Numbers
When contacting the company, reordering parts or arranging
service from an authorized dealer, you will need to provide
the model and serial numbers, which can be found on the
decal located on the unit. Copy these numbers into the space
provided below.
Record the following numbers from your new product:
Model #:
Serial #:
S J F P 3 5 – S T N
5