Replacement Part List

8
5. To read the battery current voltage, turn the unit on.
Push and hold the ON/OFF button for approximately
1.5 seconds and release the button when the unit beeps
(Fig. 3).
6. A full recharge may take up to 24 hours. The battery
indicator will display the battery level during the charging
stage.
7. To turn the unit o, press and hold the ON/OFF power
button for approximately 1.5 seconds, release when
the unit beeps. LCD display indicators will turn back to
charging-only mode.
Charging with Sun Joe
®
Foldable Solar
Panels (OPTIONAL - Sold Separately)
The portable generator is equipped with a solar charging input
and can be charged by 12 V DC solar panels rated to produce
a maximum of 20 A current, such as Sun Joe
®
Foldable Solar
Panels (SJ1440SP). Visit snowjoe.com or call customer service
at 1-866-SNOWJOE (1-866-766-9563) to purchase.
To charge the generator by Sun Joe
®
foldable solar panels,
follow these steps:
1. Unfold the solar panels (Fig. 4). There are 2 x 25 ft
(2 x 7.6 m) solar connector cables inside the package.
2. Plug the branch connectors into the solar panel cables
(Fig. 5). (one-way connectors ensure the polarity is
correct).
3. Connect the solar panel cables into the solar charging
inputs (Fig. 6).
Fig. 3
Battery current voltage
Press and hold 1.5 seconds
Fig. 4
Branch connectors
Solar
panel
cables
Solar panels
Solar connector cables
Fig. 5
Branch
connectors
Solar
panel cables
Solar
panels
Fig. 6
Solar panel cables