Replacement Part List
11
Features
LCD Display Backlight
1. The generator LCD display backlight comes pre-
programmed from the factory to briey light the panel and
then turn o automatically.
2. To reprogram the backlight to stay on until turned
o manually, press and hold the ON/OFF button for
approximately 3 seconds (Fig. 16).
3. After approximately 1.5 seconds, the unit will beep
once, but continue pressing ON/OFF button down for
approximately three more seconds until the unit beeps
again and the backlight is illuminated (Fig. 16).
4. To reprogram the backlight so that it turns o
automatically, repeat the steps above.
Fig. 16
Turn ON backlight: press 3 seconds
Turn OFF backlight: press 3 seconds