Replacement Part List

4. Turn the motor housing upside down and lay it on the

ground. Insert the two pieces of the upper frame into the

sockets on either side of the motor housing, and secure

each one with a thread forming screw (Fig. 4).

5. Place the lower frame onto the upper frame. Align the

holes on the tube sections and secure each side with the

included bolt and frame knob (Fig. 5).

Fig. 3

Thread

forming

screws

Feet

Fig. 4

Thread

forming

screw

Motor

housing

Upper frame

Thread

forming

screw

6. Turn the mulcher + shredder right side up and fit the

funnel onto the motor housing. Be sure to align the small

tab on the motor housing with the notch in the funnel

(Fig. 6).

7. Secure the funnel with the two latches on either side of

the motor housing (Fig. 7).

Fig. 5

Lower

frame

Frame

knob

Bolt

Upper

frame

Fig. 6

Funnel

Motor

housing

Tab

Notch

Fig. 7