User Manual

13
Troubleshooting
The blower/
vacuum/mulcher
fails to operate
No/low blowing
power
No/low vacuuming
power
• No power supply
• Plug not connected
• Extension cord damaged
• Transfer lever switch in blowing mode
• Collection bag is full, dirty
• Vacuuming opening clogged or blocked by
foreign object
• Transfer lever in vacuuming mode
• Check power supply (appliance cord, circuit breakers, fuses)
• Connect the plug
• Replace extension cord
• Set transfer lever switch in vacuuming mode
• Empty/clean collection bag
• Remove blockage
• Set selector switch to blowing mode
Problem
Possible Cause
Remedy