Replacement Part List

Shoulder support strap

This unit is equipped with a adjustable shoulder support strap

that can help secure the unit in operation (Fig. 10).

1. To adjust the length of the strap, push it from one end to

form a loop above, and let out as needed (Fig. 11).

2. Then pull the strap from the other side to tighten (Fig. 12).

Blower Mode

• Ensure the tubes are assembled correctly before

operating. Turn the blower/vac mode selector switch to

BLOWING MODE. Turn unit on (Fig. 13).

• Hold the blower rmly with one hand on the main handle

and the other hand on the front handle. Sweep from side

to side with the lower tube several inches above the

ground or oor.

• Slowly advance the unit, keeping the accumulated pile

of debris in front of you. Most dry blowing operations are

better suited to low speeds rather than high speeds. High

speed blowing is best for moving heavier items like large

debris or gravel.

Vacuum/Mulcher Mode

• Once you have blown the debris/leaves into a pile, you

can convert to vacuum mode to collect the debris.

• Ensure the tubes are assembled correctly before

operating. Turn the blower/vac mode selector switch to

VACUUM MODE. Turn unit on (Fig. 14).

Fig. 10

Shoulder support

strap

Fig. 11

Fig. 12

Fig. 13

BLOWING MODE