Replacement Part List

6
Unpacking
Carton Contents
• Electric blower/vacuum/mulcher
• Lower tube
• Upper tube
• Bolts (2)
• Washers (2)
• Screws (2)
• Collection bag
• Supporting shoulder strap
• Manual with registration card
1. Carefully remove the electric blower/vacuum/mulcher and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric blower/
vacuum/mulcher. The packaging is made of recyclable
materials. Properly dispose of these materials in
accordance with local regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils or small
parts. These items can be swallowed and pose a suocation
risk!
Assembly
mWARNING! To avoid serious personal injury, read and
understand all safety instructions provided.
mWARNING! Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
mWARNING! To prevent serious personal injury, make
sure the switch is in the OFF (O) position, the unit is unplugged
and the impeller has come to a complete stop before attaching
or removing tubes.
1. Place the upper tube on the ground in an upright position.
Place the lower tube over the upper tube and press rmly
for a secure connection (Fig. 1).
2. Secure both tubes with 2 washers and 2 bolts on top and
bottom (Fig. 2).
3. Insert the tube assembly into the air outlet, and secure
with the 2 screws (Figs. 3 & 4).
Fig. 1
Lower tube
Upper tube
Fig. 2
Lower tube
Upper tube
Bolts
Washers
Bolts
Washers
Fig. 3
Tube assembly
Blower vac
air outlet