Replacement Part List

Assemble as a Vacuum/Mulcher

1. Slide the front and rear vacuum/mulcher tubes together

until the lock button engages (Fig. 4).

2. Slide the inlet cover lock button forward to disengage the

inlet cover. Hold the cover open (Fig. 5).

3. With the blower tube removed, insert the "hooked" side

end of the mulcher tube into the rear clip on the unit.

Securely fasten the mulcher tube by pushing the "wedged"

side end of the mulcher tube up until the lock button snaps

into the locked position (Fig. 6).

4. Insert the collection bag adaptor into the blower air outlet

until the collection bag is securely fastened (Fig. 7), then

clip the bag to the strap holder. Simply press the tube

release button to remove the bag (Fig. 8).

5. To remove the vacuum/mulcher tube assembly, slide the

inlet cover lock button to unlock, then remove the tube

assembly from its housing (Fig. 9).

NOTE: It may be necessary to remove the blower tube or

vacuum/mulcher tubes to clear a blocked tube or impeller.

Make sure to disconnect the unit from the power supply

before attempting to clear any obstructions.

Fig. 4

Rear tube Front tube

Fig. 5

Inlet cover

lock button

Inlet cover

Fig. 6

Rear clip +

Hook side

Wedged side

Fig. 7

Collection bag

Air outlet

Collection

bag adaptor

Fig. 8

Tube release

button

Fig. 9

Inlet cover

lock button