Replacement Part List

6
Unpacking
Carton Contents
• Electric blower
• Rear blower tube
• Front blower tube
• Manual with registration card
1. Carefully remove the electric blower and check to see that
all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric blower.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suocation
risk!
Assembly
mWARNING! To avoid serious personal injury, read and
understand all safety instructions provided.
mWARNING! Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
mWARNING! Before performing any maintenance, make
sure the tool is unplugged from the power supply. Failure to
heed this warning could result in serious personal injury.
Attaching the Blower Tube
1. Align the grooves on the front blower tube with the
grooves on the rear blower outlet. Push the front blower
tube onto the rear blower outlet until it snaps into place
(tube is secured by release button) (Figs 1 & 2).
2. Fit the blower tube onto the motor housing (Fig. 3).
3. Push the blower tube onto the housing and depress the
locking button and slide the tube until the lock button sets
into hole (Fig. 4).
Fig. 1
Rear blower outlet Front blower tube
Fig. 2
Release button
Fig. 3
Fig. 4