User Manual

ManualsBrandsSun Joe ManualsSun Joe24V-DD-LTE 24-Volt iON+ Cordless Drill Driver Kit | W/ 2.0-Ah Battery and Charger

A Division of Snow Joe

, LLC Model 24V-DD-LTE Form No. SJ-24V-DD-LTE-880E-M

OPERATOR’S MANUAL

, LLC

SAVE THESE INSTRUCTIONS

CORDLESS DRILL/DRIVER

24-VOLT MAX | 2.0 Ah | TOOL CASE

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety

WARNING! When using the drill/driver basic safety

precautions should always be followed to reduce the risk of

re, electric shock, and personal injury. These include:

Work Area Safety

1. Keep work area clean and well-lit – Cluttered, dark

areas invite accidents.

2. Keep children, bystanders, and pets away – All

spectators, including pets, should be kept a safe distance

away from the work area.

3. Do not operate power tools in explosive atmospheres

– Such as in the presence of ammable liquids, gases, or

dust. Power tools create sparks which may ignite the dust

or fumes.

Personal Safety

1. Stay alert – Watch what you are doing. Use common

sense. Do not operate the drill/driver when you are tired,

or under the inuence of alcohol or drugs.

2. Dress properly – Do not wear loose clothing or jewelry.

They can get caught in moving parts. Loose clothes,

jewelry, or long hair can be caught in moving parts.

3. Avoid unintentional starting – Do not carry the drill/driver

with your nger on the trigger. Make sure the switch is o

before connecting the drill/driver to power source.

4. Do not overreach – Keep proper footing and balance at

all times. Proper footing and balance enable better control

of the cordless drill/driver in unexpected situations.

5. Use personal protective equipment – Always wear eye

protection. Protective equipment such as dust mask, non-

skid safety shoes, hard hat, or hearing protection used for

appropriate conditions will reduce personal injuries.

6. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. – Use of dust collection

can reduce dust-related hazards.

7. Do not use on a ladder or unstable support – Stable

footing on a solid surface enables better control of the

power tool in unexpected situations.

Tool Use and Care

1. Do not force the tool – It will perform better with less

likelihood of personal or mechanical injury if it is used at

the rate for which it was designed.

2. Donotusedrill/driverifswitchdoesnotturnonoro

– The drill/driver that cannot be controlled with the switch

is dangerous and must be repaired.

3. Disconnect the plug from the power source and/or

battery pack from the drill/driver before making any

adjustments, changing accessories, or storing the

drill/driver – Such preventive safety measures reduce risk

of starting the power tool accidentally.

4. Store idle drill/driver out of reach of children or other

untrained persons – Drill/driver is dangerous in the hands

of untrained users.

5. Maintain cordless drill/driver – Check for misalignment

or binding of moving parts, breakage of parts, and any

other condition that may aect the drill/driver's operation.

If damaged, have the drill/driver serviced before using.

Many accidents are caused by poorly maintained tools.

6. Use the power tool, accessories and tool bits etc.

in accordance with these instructions, taking into

account the working conditions and the work to be

performed – Use of the power tool for operations dierent

from those intended could result in a hazardous situation.

Battery Tool Use and Care

1. Rechargeonlywiththechargerspeciedbythe

manufacturer – A charger that is suitable for one type

of battery pack may create a risk of re when used with

another battery pack.

2. Charge internal battery at ambient temperatures

between 50ºF – 104ºF (10ºC – 40ºF).

3. Under abusive conditions, liquid may be ejected from

the battery; avoid contact. If contact accidentally

occurs,ushwithwater.Ifliquidcontactseyes,seek

medical help – Liquid ejected from the battery may cause

irritation or burns.

Summary of content (16 pages)

PAGE 1
R OPERATOR’S MANUAL A Division of Snow Joe®, LLC CORDLESS DRILL/DRIVER 24-VOLT MAX | 2.0 Ah | TOOL CASE Model 24V-DD-LTE Form No. SJ-24V-DD-LTE-880E-M IMPORTANT! 6. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. – Use of dust collection can reduce dust-related hazards. All Operators Must Read These Instructions Before Use 7.
PAGE 2
8. Do not crush, drop or damage battery pack. Do not use a battery pack or charger that has been dropped or received a sharp blow – A damaged battery is subject to explosion. Properly dispose of a dropped or damaged battery immediately. 4. Use power tools only with specifically designated battery packs – Use of any other battery packs may create a risk of injury and fire. 5.
PAGE 3
• Store your battery pack and charger in a cool, dry place – Do not store the battery pack or charger where temperatures may exceed 105ºF (40.5ºC), such as in direct sunlight or inside a vehicle or metal building during the summer. • Maintain charger cord – When unplugging the charger, pull the plug, not the cord, from the receptacle to reduce the risk of damage to the electrical plug and cord. Never carry the charger by its cord or yank it by the cord to disconnect it from the receptacle.
PAGE 4
13. Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns. (This advice is considered correct for conventional NiMh, NiCd, lead acid and lithium-ion cell types. If this advice is incorrect for a cell design that differs from these, then the correct advice may be substituted.) 8.
PAGE 5
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand, and follow all instructions on the machine before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand, and follow all instructions in the user manual(s) before attempting to assemble and operate. SAFETY ALERT – Indicates a precaution, a warning, or a danger.
PAGE 6
Know Your Cordless Drill/Driver Read the owner’s manual and safety instructions carefully before operating the cordless drill/driver. Compare the illustration below to the cordless drill/driver in order to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. 1. Keyless chuck 12. Double-ended driver bit 2. Torque adjustment ring 13. Battery indicators 3. Two-speed gear train (high – low) 14. Push button for battery indicator 4.
PAGE 7
Unpacking Carton Contents Lights • Cordless drill/driver • Double-ended driver bit Light Indicators Charge level button • 24V iON+ lithium-ion battery The battery is at 30% capacity and requires charging • 24V iON+ lithium-ion battery quick charger • Tool case The battery is at 60% capacity and requires charging soon • Manual with registration card The battery is at full capacity 1. Carefully remove the cordless drill/driver and check to see that all of the above items are supplied.
PAGE 8
Charging the Battery 4. When the charger light turns green, the battery is fully charged (Fig. 3). 1. Push the push lock button on the battery to pull the battery pack out of the equipment (Fig. 1). 5. A fully discharged pack with an internal temperature in the normal range will fully charge in 55 mins (between 32ºF/0ºC and 113ºF/45ºC). Fig. 1 6. If the light indicators do not come on at all, check that the battery pack is fully seated into the bay. Remove the battery pack and reinsert.
PAGE 9
Assembly 3. Raise the front of the drill slightly and insert the doubleended driver bit or drill bit (Fig. 7). NOTE: Drill bit is not included. mWARNING! Always remove battery pack from the tool when you are assembling parts, making adjustments, cleaning, or when not in use. Removing battery pack will prevent accidental starting that could cause serious personal injury. Fig.
PAGE 10
3. The center position locks the tool (Fig. 13). 5. To remove bits, lock the switch trigger and open the chuck jaws (Fig. 6). 6. The bit provided with the drill can be placed in the storage area, located on the base of the drill (Fig. 10). Direction of rotation selector Fig. 13 Fig. 10 Forward Lock Reverse Center "LOCK" position Bit storage NOTE: The drill/driver will not run unless the direction of rotation selector is pushed fully to the left or right.
PAGE 11
3. To turn the drill ON, depress the trigger switch (Fig. 15). Adjusting Torque Select the proper torque setting by aligning the adjustment ring with the indicator arrow to suit the type of material and size of screw you are using (Fig. 17). Fig.
PAGE 12
Drilling/Driving Screws A level is located on the top of the motor housing to help keep the drill bit level during use (Fig. 19). Wood + Metal Drilling For maximum performance, use high speed steel bits for wood or metal drilling. Select drilling mode. Begin drilling at a very low speed to prevent the bit from slipping off the starting point. Wood Drilling Fig. 19 1. Increase the speed as the drill bit bites into the material. 2.
PAGE 13
Battery Caution + Disposal Service + Support • Drill/driver service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel may result in a risk of injury. Disposal Should your appliance need replacement after extended use, do not dispose of it with the household refuse, but in an environmentally safe way. • When servicing a drill/driver, use only identical replacement parts.
PAGE 14
Optional Accessories mWARNING! ALWAYS use only authorized Snow Joe ® + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this cordless drill/driver. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your cordless drill/driver. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.
PAGE 15
SNOW JOE® + SUN JOE® CUSTOMER PROMISE ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise. OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase.
PAGE 16
snowjoe.