Replacement Part List

Loosening the Blades

The cutter bar must be moved away from the cutting reel.

1. Loosen both screws by an equal amount by turning

them counter-clockwise.

Tightening the Blades

The cutter bar must be moved closer to the cutting reel.

1. Tighten the screws by an equal amount by turning

them clockwise.

Align Cutting Path Indication Arrow With

Previously Cut Path (Fig. 8)

NOTE: The width of the real mower actual cut is indicated

below. Do not use wheels as a reference point for grass cut line.

Checking the Adjustment (Fig. 9)

1. Turn mower upside down.

2. Insert a piece of paper between cutter bar and reel

blades, and slowly turn wheel by hand.

3. All blades should slice the paper evenly, along the

entire length of the cutter bar while the reel turns

smoothly.

4. If mower has an intermittent cut, adjustment should be

made to the appropriate side of blades to attain proper

cutting action.

Fig. 8

18 inches

Paper

Fig. 9