Replacement Part List

7
Grass Bag Assembly + Fitting
1. Fit the support rod into the holes in the plastic cover.
The bend of the support rod should face the rear of the
machine (Fig. 4).
2. Place the protective plastic straps (attached to the grass
bag) onto the support rod (Fig. 5).
3. Raise the spring-loaded ejector ap. Position the grass
bag over the coupling hooks to the mower body (Fig. 6).
4. Release the ejector ap to secure the grass bag in
position (Fig. 7).
Side-discharge Chute
Assembly + Fitting
The side-discharge chute sweeps grass clippings swiftly from
the cutting chamber, enabling you to cut taller grass without
clogging the mower deck.
m CAUTION! m
The grass bag and the side-discharge chute cannot be
used together.
Fig. 4
Support rod
Plastic
cover
Protective
plastic strap
Fig. 5
Support rod
Protective
plastic
straps
Fig. 6
Ejector ap
Grass bag
Coupling
hooks
Fig. 7
Ejector ap
Grass bag
m CAUTION! m
The grass bag and the side-discharge chute cannot be
used together.