Replacement Part List

12
5. Fit the new blade, the washer and the bolt back on
following the same steps in reverse order (Fig. 15).
Storage
Follow the steps below to prepare the lawn mower for storage:
1. Disconnect the power supply to the mower.
2. Clean the mower with a damp cloth or hand brush.
3. Inspect the mower carefully for worn, loose or damaged
parts. Check connections and screws and tighten if
necessary. Pay special attention to the mower blade and
replace/sharpen if it shows signs of wear. Refer to the
Maintenance and Care section.
4. Store the mower indoors in a dry, clean and cool area
out of the reach of children. Do not store the unit next to
corrosive materials, such as fertilizer and rock salt.
5. Wipe the extension cord to remove any foreign
substances, such as oil or stains. Replace the extension
cord immediately if it is cut or damaged in any way.
6. Wind the cord in a series of equal loops to prevent it from
tangling.
7. Do not cover the lawn mower with a solid plastic sheet.
Plastic coverings trap moisture around the mower, which
can damage the unit.
8. The handle on your lawn mower can be folded for
compact storage. Start by loosening the handle knobs on
each side of the upper handle and fold down the upper
handle (Fig. 16).
Service + Support
If your Sun Joe MJ401E electric lawn mower requires
service or maintenance, please call 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Model + Serial Numbers
When contacting the company or reordering parts, you will need
to provide the model and serial numbers of your product. These
are found on the decal axed to the housing or handle of your
mower. Copy these numbers into the space provided below.
Fig. 15
Blade
Bolt
Washer
Fig. 16
Upper
handle
knob
Upper handle
Record the following numbers from the housing or handle of your
new product:
M J 4 0 1 E
Model #:
Serial #: