Use and Care Manual

8
Know Your Cordless Pole Chain Saw
Read the owner’s manual and safety instructions carefully before operating the cordless pole chain saw. Compare the illustration
below to the pole chain saw in order to familiarize yourself with the location of the various controls and adjustments. Save this
manual for future reference.
Technical Data
Battery Voltage* 40 V D.C.
Battery Capacity 4.0 Ah
Charging Time 2.5 – 3 hours (for full charge)
Battery Run Time 25 mins/up to 75 cuts
No Load Speed 4800 ± 10%rpm
Bar Chain Length 8 in. (203 mm)
Cutting Thickness (max) 7.1 in. (180 mm)
Multi-Angle Head 0º or 30º
Telescopic Shaft 6.1 ft to 8.5 ft
(1.85 m to 2.6 m)
Overhead Reach 15 ft (4.6 m)
Oil Tank Capacity 2.7  oz (80 ml)
Weight (pole chain saw alone) 8.6 lbs (3.9 kg)
Weight (pole chain saw with battery installed) 11.2 lbs (5.08 kg)
*Initial no-load voltage, when fully charged, peaks at 40 volts; nominal voltage under typical load is 36 volts.
1. 8 in. (203 mm) Oregon guide bar
2. 8 in. (203 mm) Oregon chain
3. Oil tank cap
4. End cover nut
5. Chain/sprocket end cover
6. Cutting bar sheath
7. Hex key wrench/blade screwdriver
8. Oil level indicator window
9. Multi-angle head adjustment dial
10. Cam-lock nut
11. Cam-lock
12. Telescopic pole
13. Front handle foam grip
14. Shoulder strap
15. Safety lock switch
16. Rear handle
17. Battery compartment
18. Trigger switch
19. Push button for battery indicator
20. Battery indicator
21. Push lock button
22. EcoSharp
®
lithium-ion battery
(iBAT40)
23. EcoSharp
®
battery charger
(iCHRG40)
LOW
KICKBAC
K
1
4
5
6
11
13
12
18
17
19
20
22
23
2
3
7
10
14
15
16
min
R
LOW
KICKBACK
This picture is from
the opposite side of
this illustration
8 9
21