Replacement Part List

9
NOTE: Immediately after using the battery pack, the charge
level button may display a lower charge than it will if checked
a few minutes later. The battery cells “recover” some of their
charge after resting.
USB Charging Port
The iON100V-5AMP lithium-iON battery is equipped with
2 USB charging ports, which can provide 5 V power for most
smart phones, tablets, wearables and other USB devices.
To charge with the battery, connect a USB cable that came
with your selected electronic device to one of the USB ports
under the handle of the iON100V-5AMP battery pack and to
your device. The charging process will start immediately
(Fig. 2).
NOTE: If you experience any issues with charging your
particular device, ensure that the battery pack is fully charged.
mWARNING! Make sure the battery’s USB ports are
not contaminated with lint or other debris. Use a canned-air
type of product periodically to ensure that the port openings
are clear.
LED light
The iON100V-5AMP battery is equipped with a 0.35 watt LED
light located on the handle, which is good for camping and
emergency illumination. To turn on the LED light, open the
carry handle, and press the battery push button twice in a row.
To turn o the LED light, press the battery push button twice
again (Fig. 3).
Charger Operation
m
WARNING! Charge only the iON100V-5AMP lithium-ion
battery pack in compatible iON100V-RCH battery
charger. Other types of batteries may cause personal injury
and damage.
To reduce the risk of electric shock, do not allow water to ow
into the charger's AC/DC plug.
When to Charge the iON100V-5AMP
Lithium-Ion Battery
NOTE: The iON100V-5AMP lithium-ion battery pack does
not develop a "memory" when charged after only a partial
discharge. Therefore, it is not necessary to run down the
battery pack before placing it into the charger.
• Use the battery charge indicator lights to determine when to
charge your iON100V-5AMP lithium-ion battery packs.
• You can "top-o" your battery pack's charge before starting
a big job or after a long day of use.
Charging the Battery Packs
1. Flip open the battery compartment cover, push the battery
releasing button to release the battery pack. Pull the
battery out of the equipment. (Fig. 4).
Fig. 2
USB charging
ports
Fig. 3
LED light
Push twice to start/stop