Replacement Part List

13
mWARNING! Before making these adjustments, remove
the battery and the safety key from the lawn mower and wait
until the rotating blade has come to a complete standstill.
ALWAYS FOLLOW ALL SAFETY PRECAUTIONS AND
RECOMMENDATIONS LISTED PREVIOUSLY IN THIS
MANUAL.
1. Power o the lawn mower and remove the battery and the
safety key.
2. Push the cutting height adjustment lever to the outside of
the original slot (Fig. 14).
3. Insert the lever into the desired slot.
7-Position Height Adjustment (From front to rear):
(1) 1.20 in. (30 mm)
(2) 1.57 in. (40 mm)
(3) 1.97 in. (50 mm)
(4) 2.36 in. (60 mm)
(5) 2.76 in. (70 mm)
(6) 3.35 in. (85 mm)
(7) 3.75 in. (95 mm)
4. Reinsert the battery and the safety key to the lawn mower
and resume normal use.
Starting + Stopping
mWARNING! Before switching on the mower, make sure
that it is not in contact with any foreign objects. Keep your
hands and feet a safe distance away from the rotating mower
blade and the ejector opening. Failure to comply with these
warnings can result in severe personal injury.
IMPORTANT: Do not start the mower in tall grass.
1. Make sure the unit's switch lever is not squeezed on.
Insert the battery and the safety key in their slots (Fig. 15).
Close the battery compartment cover.
2. To start the machine, press and hold the safety lock button
while pulling the switch lever toward you (Fig. 16).
3. Once the machine powers on, release the safety lock
button and proceed with operation.
4. To stop the mower, release the switch lever.
mWARNING! The mower blade will continue to rotate for
a brief period after the unit has been switched o. Do not tilt or
carry the unit while the motor is still running and do not touch
the blade while it is still rotating. Failure to comply could result
in severe personal injury.
Using the Self-Propelled System
The cordless lawn mower is equipped with a variable-speed
self-propelled system, which is independent and can be
operated without the blade rotation. For example, when you
have completed cutting your lawn, you can use the
self-propelled system to propel the mower back to your
storage location without blade rotation. Or you may choose to
operate the mower as a non-self-propelled mower to maximize
battery run time.
To operate the self-propelled system without blade rotation,
push and hold the self-propel lever to the handle. To turn o
the self-propel system, release the self-propel lever (Fig. 17).
The system has variable speeds. Adjust the speed by turning
the speed-adjusting dial as shown (Fig. 17).
Fig. 14
Height
adjustment lever
Fig. 15
Battery
Safety key
Fig. 16
Switch lever
Safety button