Replacement Part List

9
2. Press down the handle releasing button located on the
middle bar of the handle frame, meanwhile pull the upper
handle frame to extend it to full length (Fig. 2).
Grass Collection Bag Fitting
1. Lift the ejector ap up, and remove the mulching plug
inserted in the rear discharge opening.
2. With the ejector ap lifted up, hold the grass collection
bag by the handle and hook the ends of the support rod
on the hooks on both sides (Fig. 3).
3. Release the ejector ap so that it rests on the grass bag.
(Fig. 4).
Side Discharge Chute Assembly + Fitting
Use the side discharge chute on your mower when the grass
is too tall to mulch or when side discharging is preferred. The
grass clippings produced by the side discharge chute are
noticeably larger than those produced by the mulching plug.
NOTE: When using the side discharge chute, do not assemble
the grass collection bag. Insert the mulching plug in the rear
discharge opening.
1. Lift up the side discharge door.
2. Align the grooves on the side discharge chute with the
pins on the underside of the door, and hook the grooves
on the pins (Fig. 5).
3. Release the side discharge door.
Mulching Plug Assembly + Fitting
Your mower is equipped with a mulching plug to allow the
blade to cut and recut the grass for ner clippings.
NOTE: When using the mulching plug, do not assemble the
grass collection bag or the side discharge chute.
NOTE: When the grass collection bag is not attached, the
mulching plug must be inserted in the rear discharge opening.
Fig. 2
Upper handle
frame
Handle
releasing
button
R
Fig. 3
Ejector ap
Grass collection bag
Hook (on
both sides)
Support rod
Fig. 4
Ejector ap
Grass
collection
bag
Fig. 5
Underside
Pins
Grooves
Side discharge door
Side discharge chute