Replacement Part List

14
2. To start the machine, press and hold the safety lock
button while pulling the switch lever toward you (Fig. 16).
3. Once the machine powers on, release the safety lock
button and proceed with operation.
4. To stop the mower, release the switch lever.
mWARNING! The mower blade will continue to rotate for
a brief period after the unit has been switched o. Do not tilt or
carry the unit while the motor is still running and do not touch
the blade while it is still rotating. Failure to comply could result
in severe personal injury.
Using the Self-Propelled System
The cordless lawn mower is equipped with a variable-speed
self-propelled system, which is independent and can be
operated without the blade rotation. For example, when you
have completed cutting your lawn, you can use the self-
propelled system to propel the mower back to your storage
location without blade rotation. Or you may choose to operate
the mower as a non-self-propelled mower to maximize
battery run time.
To operate the self-propelled system without blade rotation,
push and hold the self-propel lever to the handle. To turn o
the self-propel system, release the self-propel lever (Fig. 17).
The system has variable speeds. Adjust the speed by turning
the speed-adjusting dial as shown (Fig. 17).
To operate the self-propelled system with the blade rotating
for cutting:
1. Start the lawn mower as indicated by step 1 to step 3 in
Starting + Stopping section.
2. While holding the switch lever against the handle with
your left hand, push the self-propel lever to the handle
with your right hand.
3. Proceed with operation with both hands holding the self-
propel lever and the switch lever together with the soft
grip (Fig. 18).
Fig. 15
Battery
Safety key
Fig. 16
Switch lever
Safety button
Fig. 17
Self-propel lever
Speed-adjusting
dial
Increase
the speed
Reduce the
speed
Fig. 18
Switch lever
Self-propel lever