Replacement Part List

7
Unpacking
Carton Contents
• Cordless string trimmer
• Safety guard
• Safety guard screws (4)
• Hex key
• Pole knob
• Auxiliary handle assembly with handle latch, bolt and
washer
• Edger guide + ower guard
• Manuals with registration card
1. Carefully remove the cordless string trimmer and check to
see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you nd damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe
®
+ Sun Joe
®
customer service center at
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the cordless string
trimmer. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suocation
risk!
Assembly
mWARNING! Do not insert the battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
Fitting the Edger Guide + Flower Guard
1. Lightly spread the edger guide + ower guard by hand
while approaching the motor housing.
2. While lightly spreading the edger guide + ower guard, t
the curved parts into the slot on the motor housing, and
release (Fig. 1).
Fitting the Safety Guard
mWARNING! The guard must be properly installed. The
guard provides the operator and other bystanders with some
protection from thrown objects.
1. Lay the trimmer on the ground with the trimmer head
facing upward.
2. Place the safety guard on the metal bracket on the back
of the motor housing, align the 4 screw holes. Fix it with
the provided 4 safety guard screws. Tighten the screws
with the hex key provided (Fig. 2).
NOTE: Never use the tool unless the safety guard is properly
tted.
CORE TOOL
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this string trimmer, you will need to
additionally purchase either the iON100V-2.5AMP or
iON100V-5AMP lithium-ion battery and the 100 V quick
charger (model iON100V-RCH). Battery and charger options
available at snowjoe.com.
Fig. 1
Slot
Edger guide +
ower guard
Motor housing
Fig. 2
Metal bracket
Safety
guard
Safety guard screws