Replacement Part List

12
Operation
Starting + Stopping
Before you start the unit, make sure the trimmer is not
contacting any object.
1. Align the ribs of the battery pack with the battery-
mounting slots in the string trimmer. Slide the battery
pack in until it snaps into position (Fig. 16).
IMPORTANT! Make sure that the latch in the battery
compartment snaps into place and the battery pack is secured
to the tool before beginning operation.
2. Press the safety button down (on either side) and hold
it in the position. Press the On/O switch to turn on the
string trimmer. Release the safety button and continue to
squeeze the On/O switch for continued operation
(Fig. 17).
3. Using the speed adjusting switch to adjust the rotation
speed of the motor. The unit is equipped with 3 speeds
(Fig. 18).
Possible Cause
(Solution)
• Red Light – Steady
• Green Light – O
• No load charging –
There's no battery inserted
in the charger.
• Red Light – O
• Green Light – Slowly
ashes
• Normal charging – The
battery is being charged.
• Red Light – O
• Green Light – Steady
• Fully charged – The battery
is fully charged and the
charging process is nished.
• Red Light – O
• Green Light – Rapidly
ashes
• Discharged – The battery is
heavily discharged. It may
take longer to charge.
• Red Light – Slowly
ashes
• Green Light – O
• Temperature abnormal –
Charging process will start
when battery returns to
normal temperature.
• Over current charging –
The current coming through
the charger is greater
than what the charger can
support. Stop charging as
soon as possible.
• Abnormal performance
– Something is wrong with
the battery or the charger.
Contact Snow Joe
®
+ Sun
Joe
®
customer service at
1-866-SNOWJOE (1-866-
766-9563).
• Red Light – Rapidly
ashes
• Green Light – O
Indication
Fig. 16
Battery compartment
Battery pack
Latch
Fig. 17
Safety lock
button
On/O
switch
Fig. 18
Speed
adjusting
switch
Low: 4300 ± 10% rpm
High: 5000 ± 10% rpm
Turbo: 6000 ± 10% rpm