Replacement Part List

7
2. Remove the blade gently by lifting the end tip of the blade
o of the grass shear + hedge trimmer unit (Fig. 4).
3. Insert the desired blade into the base of the motor housing
(Fig. 5).
NOTE: You may need to manually move the blade or gear
shaft in order to align the gear shaft with the gear in the center
of the unit.
4. Align the gear shaft in the middle of the blade with the
gear in the middle of the unit. Align the four (4) lugs so
that the blade lays at against the housing for a secure
t (Fig. 6).
5. Once the blade is in position, replace the blade cover by
aligning the cover with the slots on the base of the motor
housing (Fig. 7).
6. Push forward on the blade cover until it slides and clicks
into place (Fig. 8). The grass shear + hedge trimmer is
now ready for use.
NOTE: If you have any questions, please call the Snow Joe
®
+ Sun Joe
®
customer service department at 1-866-SNOWJOE
(1-866-766-9563) for assistance.
Fig. 4
Fig. 5
Fig. 6
Lugs
Gear Shaft
Lugs
Fig. 7
Fig. 8