Replacement Part List

ManualsBrandsSun Joe ManualsEngines & Engine PartsBlade Cover for HJ604C + HJ605CC Hedge Trimmer/Grass Shear

, LLC

A Division of Snow Joe

, LLC

OPERATOR’S MANUAL

SAVE THESE INSTRUCTIONS

Model HJ604C/HJ604C-GRY/

HJ604C-PRP/HJ604C-BLU

Form No. SJ-HJ604C/HJ604C-GRY/

HJ604C-PRP/HJ604C-BLU-880E-M

7.2-VOLT LITHIUM-ION CORDLESS

GRASS SHEAR + HEDGE TRIMMER

IMPORTANT!

Safety Instructions

All Operators Must Read These

Instructions Before Use

Always follow these safety guidelines. Failure to do so may

result in serious bodily injury or death.

General Safety WARNINGS!

Notice the personal safety alert symbol m used in this manual

to draw your attention to a WARNING given along with the

particular operating instruction. This means that the operation

requires special ATTENTION, CAUTION, and AWARENESS.

When using this power tool, basic safety precautions should

always be followed to reduce the risk of re, electric shock,

personal injury and material damage.

mWARNING! This unit can be dangerous! Careless or

improper use can cause serious injury.

mWARNING! The rotating blades can cut you. Keep

hands and feet away from the blades and the cutting area.

Retain this manual for future reference and reread it at the start

of each trimming season.

mWARNING! This battery-operated power tool must be

charged only with the specic charging unit for the battery.

A charging unit that may be suitable for one type of battery

may create a risk of re when used with another battery type.

• Avoid accidental starting.

• When the tool is not in use, keep it away from other metal

objects.

• Before operating the tool, read the entire manual carefully

and make sure you know how to switch the tool OFF in an

emergency.

Work Area Safety

1. Keep work area clean and well lit. Cluttered and dark

areas invite accidents.

2. Do not operate power tools in explosive atmospheres,

such as in the presence of ammable liquids, gases or

dust. Power tools create sparks which may ignite the dust

or fumes.

3. Keep bystanders and children away. All bystanders,

including children and pets, should be kept a safe

distance away from the work area.

Electrical Safety

1. If the battery charger cable is damaged, please call the

Snow Joe

+ Sun Joe

customer service center at

1-866-SNOWJOE (1-866-766-9563).

2. If charging the power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected power supply. The use of an RCD reduces the

risk of electric shock.

3. Power tool plugs must match the outlet. Never modify

the plug in any way. Do not use any earthed (grounded)

power tools or battery chargers. Unmodied plugs and

matching outlets will reduce the risk of electric shock.

4. Avoid body contact with earthed or grounded surfaces

such as pipes, radiators, ranges and refrigerators.

There is an increased risk of electric shock if your body is

earthed or grounded.

5. Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

6. Do not abuse the charging cord. Never use the cord

for carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts.

Damaged or entangled cords increase the risk of electric

shock.

7. Battery charger is for indoor use only. Only charge this

battery-powered tool indoors.

Personal Safety

1. Stay alert. Watch what you are doing and use common

sense when operating the power tool. Do not use the

power tool while you are tired or under the inuence of

drugs, alcohol or medication. A moment of inattention

while operating the power tool may result in serious

personal injury.

2. Use personal protective equipment. Always wear eye

protection. Protective equipment such as safety glasses,

a dust mask, non-skid safety shoes, a hard hat, and

hearing protection, when used for appropriate conditions,

will reduce the possibility of personal injuries.

Summary of content (16 pages)

PAGE 1
7.2-VOLT LITHIUM-ION CORDLESS GRASS SHEAR + HEDGE TRIMMER Model HJ604C/HJ604C-GRY/ HJ604C-PRP/HJ604C-BLU Form No. SJ-HJ604C/HJ604C-GRY/ HJ604C-PRP/HJ604C-BLU-880E-M OPERATOR’S MANUAL A Division of Snow Joe®, LLC IMPORTANT! 3. Keep bystanders and children away. All bystanders, including children and pets, should be kept a safe distance away from the work area. Safety Instructions Electrical Safety All Operators Must Read These Instructions Before Use 1.
PAGE 2
Service 3. Avoid unintentional starting. Ensure the switch is in the OFF position before connecting to the power source/ battery charger, or before picking up or carrying the tool. Carrying power tools with your finger on the switch or charging power tools with the switch ON can lead to accidents. 1. If your power tool requires service, contact an authorized Snow Joe® + Sun Joe® dealer or call the Snow Joe® + Sun Joe® customer service center at 1-866-SNOWJOE (1-866-766-9563).
PAGE 3
11. DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 104 ºF (40 ºC). Dangerous storing locations include outdoor sheds or metal buildings in the summer. 12. The charger is designed to operate on standard household electrical power (120 V). Do not attempt to use it with any other voltage! NOTE: The integrated battery is not fully charged out of the carton. Read the safety instructions and then follow the charging notes and procedures. 13.
PAGE 4
Safety Symbols The following table depicts and describes safety symbols that may appear on this product. Read, understand and follow all instructions on this tool before attempting to assemble and operate. Symbols Descriptions Symbols Descriptions READ THE OPERATOR'S MANUAL(S) – Read, understand and follow all instructions in the user manual(s) before attempting to assemble and operate. SAFETY ALERT – Indicates a precaution, a warning or a danger.
PAGE 5
Know Your Cordless Grass Shear + Hedge Trimmer 1. Charger socket 2. Safety lock-off button 1 3. Charge level indicator 4. Power ON/OFF trigger switch 3 2 5. Motor housing 6. Grass shear blade 7 Blade cover 8. Hedge trimmer blade 4 9. Battery charger 5 10. Charger plug 7 6 8 9 10 Technical Data Charger Input 100 – 125 V ~ 50/60 Hz Charger Output 9V Battery Voltage Cutting Diameter 0.3 in. (8 mm) No Load Speed 1,250 ± 10% rpm 7.
PAGE 6
Unpacking Fig. 1 Carton Contents • Cordless grass shear + hedge trimmer • Hedge trimmer blade • Grass shear blade • AC charging adaptor • Manual with registration card 1. Carefully remove the cordless grass shear + hedger trimmer and check to see that all of the above items are supplied. 2. Inspect the product carefully to make sure no breakage or damage occurred during shipping. If you find damaged or missing parts, DO NOT return the unit to the store.
PAGE 7
5. Once the blade is in position, replace the blade cover by aligning the cover with the slots on the base of the motor housing (Fig. 7). 2. Remove the blade gently by lifting the end tip of the blade off of the grass shear + hedge trimmer unit (Fig. 4). Fig. 4 Fig. 7 3. Insert the desired blade into the base of the motor housing (Fig. 5). 6. Push forward on the blade cover until it slides and clicks into place (Fig. 8). The grass shear + hedge trimmer is now ready for use. Fig. 5 Fig.
PAGE 8
Before Using 1. Plug the charger adaptor into an appropriate AC power outlet. Connect the AC adaptor charger plug into the charging socket of the grass shear + hedge trimmer and switch on the mains power (Fig. 9). Charging procedure The battery charger supplied matches the lithium-ion battery installed in the tool. Do not use other battery chargers. The lithium-ion battery is protected against deep discharging. When the battery is empty, a protective circuit will automatically switch OFF the machine.
PAGE 9
Operation Cutting Tips 1. Shaping – A hedge should be trimmed to achieve a trapezoidal form; it should widen toward the bottom on both sides. Shaping a hedge in this manner improves the penetration of light to the lower extremities. A general guideline is to slant the hedge approximately 4 in. (10 cm) for each 39 in. (1 m) of hedge height. IMPORTANT! The product is intended for light-duty trimming of shrubs and lawn edges for residential properties.
PAGE 10
Maintenance 1. Keep the ventilation vents of the tool clean at all times. If possible, prevent foreign matter from entering the vents. 2. If the enclosure of the trimmer requires cleaning, do not use solvents to clean it. Only use a moistened soft cloth. Never let any liquid get inside the tool; and never immerse any part of the tool into a liquid. 3. The blade rail should be cleaned and treated with light machine oil or spray lubricant (such as WD-40) after each use.
PAGE 11
Accessories mWARNING! ALWAYS use only authorized Snow Joe + Sun Joe® replacement parts and accessories. NEVER use replacement parts or accessories that are not intended for use with this cordless grass shear + hedge trimmer. Contact Snow Joe® + Sun Joe® if you are unsure whether it is safe to use a particular replacement part or accessory with your cordless grass shear + hedge trimmer. The use of any other attachment or accessory can be dangerous and could cause injury or mechanical damage.
PAGE 12
NOTES 12
PAGE 13
NOTES 13
PAGE 14
NOTES 14
PAGE 15
SNOW JOE® + SUN JOE® CUSTOMER PROMISE ABOVE ALL ELSE, Snow Joe® + Sun Joe® are dedicated to you, our customer. We strive to make your experience as pleasant as possible. Unfortunately, there are times when a product does not work or breaks under normal operating conditions. We think it’s important that you know what you can expect from us. That’s why we created the Snow Joe® + Sun Joe® promise. OUR PROMISE: Snow Joe® + Sun Joe® warrant new products for two years from the date of purchase.
PAGE 16
snowjoe.