Replacement Part List

IMPORTANT: The blades must be set in the correct turning

direction. Note the position of the original blades, and replace

them in the exact same direction.

5. Only use blades that are produced by the manufacturer.

Cleaning, Maintenance +

Storage

mWARNING! Unexpected blade movement may cause

personal injury. Before servicing, repairing or inspecting

the unit, turn the motor OFF and disconnect the extension

cord. Wait for the blades to completely stop rotating before

conducting inspection, cleaning or maintenance.

mWARNING! Contact with hot components (i.e. motor

housing or gear box) on the machine may cause burns. Allow

the machine to cool o before handling.

IMPORTANT!

• Wear protective gloves when cleaning or maintaining the

machine.

• Do not use cleaning uids or solvents or spray the

machine down with water (especially pressurized water)

when cleaning the machine.

NOTE: After each use, follow these steps when cleaning the

machine:

Fig. 61

Fig. 62

Fig. 63

Fig. 64

Locknut

Fig. 65

Fig. 66