Replacement Part List

6. Repeat the steps 2 – 4 to assemble the other wheel.

Stand Assembly Fitting

1. Turn the wood chipper + shredder main body upside

down, insert the two ends of the stand assembly into the

housing (Fig. 6).

2. Align the holes on the main body housing and stand

assembly, insert the washer into the screw and install into

the stand assembly on both sides (Fig. 7).

Fitting the Paddle Holder and the Paddle

1. Stand the unit up, and clip the paddle holder to the

standing assembly (Fig. 8).

2. Clip the paddle into the paddle holder (Fig. 9).

NOTE: Be sure to place the paddle in the paddle holder every

time after using.

Operation

Starting + Stopping

mWARNING! Before starting, ensure that the feed inlet

is empty.

mWARNING! The wood chipper + shredder will not run

if the hopper is open or not closed tightly. Always close the

hopper tightly by turning the hopper locking knob clockwise

before starting the machine (Fig. 10).

Fig. 5

Wheel cover

Wheel

Fig. 6

Main body

Stand

assembly

Fig. 7

Washer

Screw

Fig. 8

Paddle holder

Standing

assembly

Fig. 9

Paddle

holder

Paddle