Installation Guide

If Your Fittings Are Loose
1. Simply reconnect the locking collar assembly and tighten securely, as shown (Figs. A – B – C).
If Your Fittings Are Completely O
1. Put the hose collar on (Fig. D).
2. Put the hose tting on; twist as needed for a secure t (Fig. E).
3. Tighten the two pieces together securely (Figs. F – G – H).
Garden
hose
Hose
collar
Hose
tting
Fig. D
Garden
hose
Fig. F
Garden
hose
Fig. G
Garden
hose
Fig. H
Garden
hose
Hose
collar
Hose
tting
Fig. E
The locking collar mechanisms on
your lightweight hose are specially
designed to work with the highly
exible material to maintain a leak-
free seal. In the event that your
ttings are loose or o, follow the
instructions below.
LET’S STAY
CONNECTED
m DON’T FORGET!
• Do NOT leave the water turned ON with the hose under pressure when not in use.
• Always turn the water OFF and drain the water from the hose after each use.
• Do NOT leave the hose under pressure for extended periods.
• Do NOT leave the hose in the sun for long periods; after use, store in a shady place.
• Avoid crushing, cutting or damaging the hose with heavy objects, car wheels, lawn mowers, etc.
Garden
hose
Fig. B
Garden
hose
Fig. C
Fig. A
Garden hose
Locking collar
assembly
EN