Replacement Part List
4
17. Prevent unintentional starting – Ensure the switch is in 
the o-position before connecting to battery pack, picking 
up or carrying the appliance. Carrying the appliance with 
your nger on the switch or energizing an appliance that 
has the switch on invites accidents.
18. Disconnect battery pack before cleaning or servicing –  
Disconnect the battery pack from the appliance before 
making any adjustments, changing accessories, or 
storing. Such preventive safety measures reduce the risk 
of starting the appliance accidentally.
19  Do not short circuit – When battery pack is not in use, 
keep it away from other metal objects, like paper clips, 
coins, keys, nails, screws or other small metal objects, 
that can make a connection from one terminal to another. 
Shorting the battery terminals together may cause burns 
or a re.
20. Replacement parts – When servicing this unit, use only 
identical replacement parts.
21. Do not modify or attempt to repair the appliance or the 
battery pack (as applicable) except as indicated in the 
instructions for use and care.
Information about the charger and the 
charging process
1.  Please check the data marked on the rating plate of the 
battery charger. Be sure to connect the battery charger 
to a power supply with the voltage marked on the rating 
plate. Never connect it to a dierent mains voltage.
2.  Protect the battery charger and its cord from damage. 
Keep the charger and its cord away from heat, oil and 
sharp edges. Have damaged cords repaired without delay 
by a qualied technician at an authorized Snow Joe
®
 + 
Sun Joe
®
 dealer or call the Snow Joe
®
 + Sun Joe
®
customer service center at 1-866-SNOWJOE  
(1-866-766-9563).
3.  Electrical plugs must match the outlet. Never modify 
the plug in any way. Do not use any adapter plugs with 
grounded appliances. Unmodied plugs and matching 
outlets will reduce the risk of electric shock.
4.  Keep the battery charger, battery pack(s) and the cordless 
tool out of the reach of children.
5.  Do not use the supplied battery charger to charge other 
cordless tools.
6.  During periods of heavy use, the battery pack will become 
warm. Allow the battery pack to cool to room temperature 
before inserting it into the charger to recharge.
7.  Do not overcharge batteries. Do not exceed the maximum 
charging times. These charging times only apply to 
discharged batteries. Frequent insertion of a charged or 
partially charged battery pack will result in overcharging 
and cell damage. Do not leave batteries in the charger for 
days on end.
8.  Never use or charge batteries if you suspect that it has 
been more than 12 months since the last time they were 
charged. There is a high probability that the battery pack 
has already suered dangerous damage (exhaustive 
discharge).
9.  Charging batteries at a temperature below 41°F (5°C) will 
cause chemical damage to the cells and may cause a re.
10. Do not use batteries that have been exposed to heat 
during the charging process, as the battery cells may have 
suered dangerous damage. 
11. Do not use batteries that have suered curvature or 
deformation during the charging process or those that 
exhibit other atypical symptoms (gassing, hissing, 
cracking, etc.)
12. Never fully discharge the battery pack (maximum 
recommended depth of discharge is 80%). A complete 
discharge of the battery pack will lead to premature aging 
of the battery cells.
Protection from environmental inuences
1.  Wear suitable work clothes. Wear safety goggles.
2.  Protect your cordless tool and the battery charger from 
moisture and rain. Moisture and rain can cause dangerous 
cell damage.
3.  Do not use the cordless tool or the battery charger near 
vapors and ammable liquids.
4.  Use the battery charger and cordless tools only in dry 
conditions and at an ambient temperature of 41ºF – 105°F 
(5°C – 40.5°C).
5.  Do not keep the battery charger in places where the 
temperature is liable to reach over 105°F (40.5°C). 
In particular, do not leave the battery charger in a car that 
is parked in the sunshine.
6.  Protect batteries from overheating. Overloads, 
overcharging and exposure to direct sunlight will result 
in overheating and cell damage. Never charge or work 
with batteries that have been overheated – replace them 
immediately, if possible.
7.  Store the charger and your cordless tool only in dry 
locations with an ambient temperature of 41ºF – 105°F 
(5°C – 40.5°C). Store your lithium-ion battery pack in a 
cool, dry place at a temperature of 77°F (25°C).  
Protect the battery pack, charger and cordless tool from 
humidity and direct sunlight. Only place fully charged 
batteries in storage (charged to at least 40%).
8.  Prevent the lithium-ion battery pack from freezing. 
Battery packs that were stored below 32°F (0°C) for more 
than 60 minutes must be discarded.
9.  When handling batteries, be wary of electrostatic charge. 
Electrostatic discharges can damage the electronic 
protection system and the battery cells. Avoid electrostatic 
charging and never touch the battery poles.










