Replacement Part List

9
3. The battery indicator LEDs will illuminate one by one
during the charging process. Unplug the charger
immediately when the 3 LEDs are all illuminated.
4. The 24VCHRG-QC Quick Charger (sold separately) and
the 24VCHRG-DPC Dual Port Charger (sold separately)
are also equipped with additional charging indicating
lights which will indicate the charging status (Figs. 2 – 3).
mCAUTION! FIRE HAZARD. When disconnecting the
charger from the battery, be sure to unplug the charger from
the outlet rst, then disconnect the charger from the battery.
mWARNING! The chargers do not automatically turn
owhenthebatteryisfullycharged.Please take care not
toleavethebatterypluggedintothecharger.Switchoor
unplug the charger at the mains when charging is complete.
5. Timely recharging of the battery will help prolong the
battery's life. You must recharge the battery pack when
you notice a drop in the equipment's power.
IMPORTANT! Never allow the battery pack to become fully
discharged as this will cause irreversible damage to the
battery.
6. When charging is complete, remove the battery from the
charger by pulling the push lock button and sliding the
battery backward to unlock it from the charger.
Assembly
mWARNING! To avoid serious personal injury, read and
understand all safety instructions provided.
mWARNING! Do not insert battery until assembly is
complete. Failure to comply could result in accidental starting
and possible serious personal injury.
mWARNING! Before performing any maintenance,
make sure battery is removed. Failure to heed this warning
could result in serious personal injury.
mWARNING! To prevent serious personal injury,
make sure the unit is powered o, and the battery is removed
before attaching or detaching the wands.
Wands Assembly
NOTE: The portable power cleaner is equipped with two
wands: the spray wand and the extension wand. To connect
the wands, follow the instruction below.
1. First, t the extension wand into the gun rmly by aligning
the two tabs on the wand with the grooves in the gun,
and rotate it clockwise until the two parts are completely
locked (Fig. 4).
2. Attach the spray wand into the extension wand by the
same method (Fig. 5).
Connect to Water Source
The power cleaner can be connected with spigot by a regular
garden hose with the included garden hose adapter, and
can be connected with fresh water or bucket water with the
included siphon hose.
mCAUTION! The power cleaner must only be used with
clean (fresh) water; use of unltered water containing corrosive
chemicals will damage the power cleaner.
mWARNING! When connecting with fresh water (lake,
spring, pond) make sure to use the equipped siphon hose.
The siphon hose has a lter on the end, which will lter out dirt
from fresh water sources.
Fig. 3
Battery pack
24VCHRG-DPC
dual port charger
(Sold separately)
red
Charging
green
Fully
Charged
Fig. 4
Extension wand
Tab
Fig. 5
Spray wand
Extension wand