Use and Care Manual

10
mWARNING! Ensure all hose connections are secure
before using misting fan. Spilled water and leaks can result in a
slippery surface and create a slip and fall hazard.
mWARNING! Do not use any attachments or accessories
not recommended by the manufacturer of this product. The
use of attachments or accessories not recommended can
result in serious personal injury.
mWARNING! Do not use this product to spray pesticides,
liquid fertilizers, chemicals, or any liquids other than clean
water. Spraying these substances could result in serious injury
or illness to the operator or bystanders.
Control Panel (Fig. 4)
1. Fan speed control – The fan switch is used to start or
stop the fan as well as to change the fan speed. The
air velocity can be increased from 8.2 ft/s to 25 ft/s by
pushing the fan speed control button. The Fan speed
indicator next to the button will indicate the current speed.
2. Rotation control button – Press to start the rotary
function of the fan assembly. The fan assembly will rotate
from side to side, from -35° to 35° (Fig. 5).
3. Power supply button – Press to turn on and shut o
the machine.
NOTE: The power supply button is only used to connect
the unit's circuit with the battery power supply. The fan
or the misting will not start by only pressing the power
supply button. Both the fan switch and the pump switch
must each be pressed separately to activate their
functions.
4. Pump switch – Press to start or stop the misting
function of the fan. It can also be used to control the
misting ow. The misting ow indicator next to the button
will indicate the current misting ow.
FAN ANGLE ADJUSTMENT
The fan head can be set to multiple angles from 0° to 160°, in
20º increments. To adjust the direction of the mist/wind, simply
use your hand to adjust the fan head to the desired position
(Fig. 6).
Use the Fan without Misting
1. Place the fan assembly without the bucket on a secure
and stable surface in a standing, upright position. Make
sure the fan is not connected with any water source. Store
the intake hose by clipping it around the base of the fan
assembly, as shown (Fig. 7).
Fig. 4
Fan switch
Rotation
control button
Power supply
button
Fan speed
indicator
Pump switch
Mist ow
indicator
Fig. 5
Rotation
control
button
Fig. 6
Fan head
Mist
0°
Mist
160°